TRAFFIC MANAGEMENT PLAN Category 1 Traffic Control Plan (BC TMM 2020)

This guided tool helps contractors prepare a compliant Category 1 Traffic Management Plan using BC standards.

This tool does not replace road authority approval or professional judgment.
Optional review or assistance is available at the end.

Category Thresholds (TMM 2020 – Table 3.1)

• Category 1: Total Score < 16
• Category 2: Total Score 16–25
• Category 3: Total Score > 25

Table 3.1 – Project Risk Score: {t31_total_score}

This assessment has been calculated using BC Traffic Management Manual (TMM) methodology.

The following questions help assess whether this project qualifies as Category 1 under the Traffic Management Manual (TMM).

Answer based on actual site conditions, not assumptions.

Identify site-specific risks that may affect road users, workers, or the public.

If unsure, select Unsure — this flags the project for recommended review.

Project Risk Thresholds (TMM 2020 – Table 3.2)

• Low Risk: Total Score < 23
• Medium Risk: Total Score 23–28
• High Risk: Total Score > 28

Table 3.2 – Project Risk Level: {t32_project_risk}

This determination is calculated in accordance with
BC Traffic Management Manual (TMM 2020) – Table 3.2 methodology.

This tool does not replace professional engineering judgment or regulatory review. Users remain responsible for verifying project classification and compliance with the BC Traffic Management Manual (TMM) and WorkSafeBC requirements

Site Sketch Requirements

In accordance with the BC Traffic Management Manual  for Work on Roadways (TMM 2020) and WorkSafeBC OHS Regulation Part 18, the site-specific Traffic Control Plan sketch must clearly identify:

• Work zone limits
• Traffic control device placement
• Pedestrian routing (if applicable)
• Buffer spaces and taper lengths
• Hazard areas and worker exposure points
• TCP positions with clearly marked escape routes

Sketches that do not clearly identify TCP escape routes may be returned for revision.

You may use the Official TrafficPlan.ca Field Traffic Control Plan Sketch Sheet (1 box = 10 m reference grid), or submit a company standard or engineered drawing where applicable.

Download the Official TrafficPlan.ca Field Traffic Control Plan Sketch Sheet (1 box = 10 m reference grid).

Upload your completed site sketch below.

TrafficPlan.ca offers optional professional review and assistance.

Selecting an option below does not obligate you to proceed.

This Category 1 Traffic Management Plan has been prepared using TrafficPlan.ca’s structured screening framework aligned with BC MoTI TMM 2020 and WorkSafeBC OHSR Part 18.

Implementation, road authority acceptance, and regulatory compliance remain the responsibility of the permit holder and/or contractor.